UFO-7T is a 1oz bottle of UFO Thick odorless foam-safe CA glue.
Pack Quantity: 12
Case Quantity: 100
UFO Thick has a viscosity similar to honey and cures in about 60 seconds when pressed with firm pressure between two parts. It is thick and gap-filling like Special T, but this is a low-bloom formula so it emits practically NO FUMES or odor. If you have ever worked with CA glue before, you know those curing fumes can be very irritating, which is why we recommend always working with adequate ventilation. However, some people are very sensitive, so even if they work in a well-ventilated area, they still may experience irritation of their eyes and nasal passages. For other people, the work environment is very confined and simply cannot be adequately ventilated. If you find yourself in one of these situations, UFO Odorless CA glue is the answer.
Additionally, UFO Thick will not attack foam. This is very important for modelers working with styrofoam, as normal CA glues can attack and destroy it, turning a precious model into scrap. If you want an instant glue to bond styrofoam, you can’t afford NOT to use UFO.
However, if you do not have a special sensitivity to the fumes and have adequate ventilation, and if you are not working on styrofoam, we recommend using our Special T instead. Special T cures a little faster and is considerably less expensive, so for normal applications it is the better choice.
UFO thick should be applied just like Special T. The best use is for parts that are missing pieces or don’t fit very well together. UFO Thick will bond the same materials as with our other CA glue- wood, metal rubber, nitrile, composites, many types of plastics- and UFO Thick can make do even with poor fits. The gap-filling capability is very useful when there is a large chunk missing from a surface- filling that space with UFO Thick can preserve the structural integrity, seal the area from moisture and contaminants, bond something to the exterior that would not fit otherwise, cover and protect jagged edges, and improve the look of the surface.
If you have pieces that do fit well together, then this is the wrong CA glue to use, as it will create extra space in between the pieces. You would be better off using UFO Thin instant glue for non-porous, tightly-fitting pieces. However, if you have broken pieces (especially styrofoam) with gaps that need filling, this is the best instant glue to use. UFO Thick is probably the most pleasant CA glue to use because its thick viscosity prevents it from running, you can adhere parts that don’t fit well, it produces virtually no odor, and it won’t attack foam. UFO Thick cures slower than all of our other CA glues (roughly 20 seconds with accelerator and 60 seconds without accelerator when pressed firmly between two parts), so you also have more time to assemble your pieces.
We recommend using the NCF Quick CA glue accelerator to ensure a complete cure of the bond. You may also want to keep a bottle of our Super Solvent debonder for CA glue on hand to remove super glue from your hands and most surfaces. You may not need Super Solvent often, but it doesn’t go bad, and you’ll be glad you have it when you need it!
Store unopened bottles in the freezer to extend shelf life. Bottles of super glue (any brand) which have been opened will experience a shorter shelf life if they are continually taken out of and put back into cold storage. Shelf life is 1 year for 1oz bottles.
Each weight: .1 lbs
Pack quantity: 12
Pack weight: 1.3 lbs
Case quantity: 100
Case weight: 10.5 lbs
Tariff code: 3506.10.00
Shelf life: 1 year
Country of Origin: US