|
|
 |
 |
HOT STUFF™
Hot Stuff™ and UFO™ Odorless THIN
have a consistency resembling that of water and are used
mainly for bonding parts which fit very well. UFO™ is
odorless. Those who are sensitive to cyanoacrylate
curing fumes will enjoy using new UFO™ in place of
regular HOT STUFF™. |
|
 |
UFO™
"UFO" Odorless 'THIN' will not
attack foam,making foam bonding possible ("UFO" Odorless
'THICK' is the better choice for bonding foam, however).
Fiberglass skins, right on the foam, are practical and
easy with "UFO" Odorless 'THIN'. (see detailed
instructions in "HOW THEY'RE
USED") |
|
 |
SUPER 'T'™
Super 'T'™ has a consistency similar
to that of syrup and has the ability to fill small gaps
between parts which don't fit perfectly. SUPER 'T'™
cures at a slower rate than HOT STUFF™, (10-25 seconds
depending on the material). |
|
|
 |
SPECIAL 'T'™
Special 'T'™ and new UFO™ Odorless
THICK are very thick cyanoacrylates with a consistency
resembling cold honey. SPECIAL 'T'™ and UFO™ Odorless
THICK have greater gap-filling ability than SUPER 'T'™
and more positioning time after contact of parts. The
rate of cure is slow enough, (usually 50-60 seconds
depending on the material), to allow precise alignment
of parts, after assembly. |
|
 |
UFO™ THICK
UFO™ is odorless. Those who are
sensitive to cyanoacrylate curing fumes will enjoy using
the new UFO™ in the place of Special 'T'™. UFO™ Odorless
THICK will not attack foam, making foam bonding
possible. NCF HOT or MILD should be used to speed the
cure. For foam, use Spray n' Cure™ accelerator. |
|
| |
 |
NCF
Quick™ ---this
product is lacquer, foam, and plastic friendly
---
NCF
Quick™ is used with HOT STUFF, UFO Odorless THIN, SUPER
T, and UFO Odorless THICK., and with it you can do
almost magical things. Why an accelerator when HOT STUFF
& SUPER T are so fast anyway? NCF Quick works in
three ways to make HOT STUFF , SUPER 'T' and SPECIAL 'T'
EASIER, FASTER, STRONGER and able to bond some of the
most unusual materials you can think of.
EASIER - you decide how fast the cure should be even on pitchy woods that often take longer to bond.
FASTER
- because NCF Quick™ contains special ingredients which
prepare the bonding surface and act as catalysts to
start the thermal reaction, resulting in curing even at
low temperatures.
STRONGER - because the cleaner the surface is from the oils that can be found on almost anything, due to handling or oils which are deposited naturally from the air, the better the bond.
Part may
be sprayed 3 minutes, or longer, in advance of bonding.
Apply SUPER T in a spiral pattern to other part,
assemble parts, then hold firmly for 10
seconds. |
 |
NCFM™
NCFM™ is the Mild Formula accelerator for use with HOT STUFF™, UFO™ Odorless THIN, SUPER T™, and UFO™ Odorless THICK., and with it you can do almost magical things. Why an accelerator when HOT STUFF™ & SUPER 'T'™ are so fast anyway? NCFM™ works in four ways to make HOT STUFF™ , SUPER 'T'™ and SPECIAL 'T'™ easier, faster, stronger and able to bond some of the most unusual materials you can think of. Easier - you decide how fast the cure should be even on pitchy woods that often take longer to bond. Faster - because NCFM™ contains special ingredients which clean the bonding surface and act as catalysts to start the thermal reaction, resulting in curing even at low temperatures. Stronger - because the cleaner the surface is from the oils that can be found on almost anything, due to handling or oils which are deposited naturally from the air, the better the bond. NCFM™ MAY MELT SOME EXPANDED FOAM PRODUCTS. |
 |
NCF™
NCF is an extremely fast acting accelerator for all instant glues. "NCF" does everything NCFM" will do, (see "NCFM" details), in a fraction of the time. "NCF" has an extraordinary on-part life. Apply to one part only. Part may be sprayed up to 8 minutes in advance of bonding. Apply SUPER'T' in a spiral pattern to other part, assemble parts, then hold firmly for 10 seconds. |
 |
SPRAY'N CURE™
Spray'N Cure™ is completely FREE of all chlorinated and fluorinated solvents. Spray'N Cure™ works similar to NCFM™. It has a 2 minute on-part life after the area is completely dry.
Special Note: Because SPRAY
'N CURE™ has no chlorinated and fluorinated solvents,
user must allow 50 to 60 seconds (at room temperature)
for complete drying before bonding, white foam
friendly. |
|
|
| |
 |
SUPER SOLVENT™
Ultra Solvent™ is a remarkable debonder and cleaner for any instant glue. Use it for hand clean-up when ever you are manipulating small parts with your fingertips (instant glues make a thin, hard shell when cured on fingertips, reducing one's ability to work skillfully with tiny pieces) or just to get it off at the end of the day. Use Ultra Solvent™ to remove instant glue from most clothing and surfaces. Some fabric, colorings or materials may be affected, so test-patch on an inconspicuous place. Ultra Solvent™ is not a thinner for instant
glue. |
|
|
|
