Nick Schade of Guillemot Kayaks shows how to assemble a Stitch and Glue Night Heron kayak in the video below. The video involves much more than our CA glue, but the embedded video below begins when Nick starts spot welding the seams with Special T thick CA glue and NCF Quick accelerator. In his written instructions, Nick says
I use a quick spot weld of CA glue to bond together the panels. This is a fast way to get on with the job, you could use a small epoxy fillet instead, but the CA glue is set almost immediately. A couple dots between each stitch is enough. The spot of glue should not be too big or it will interfere with the eventual fillet. A quick spray of accelerant will set the glue. Apply glue along all the seams including into the stems.
Check out the video below, and be sure to visit Guillemot Kayaks' website and Youtube channel!