UFO User Friendly Odorless

UFO Thin and UFO Thick odorless foam-safe CA glue are similar to Hot Stuff Original and Special T but with a few important differences. First, these CA glues are low-bloom formulas, so they emit practically NO FUMES or odor. If you have ever worked with CA glue before, you know those curing fumes can be very irritating, which is why we recommend always working with adequate ventilation. However, some people are very sensitive, so even if they work in a well-ventilated area, they still may experience irritation of their eyes and nasal passages. For other people, the work environment is very confined and simply cannot be adequately ventilated. If you find yourself in one of these situations, UFO Odorless CA glue is the answer.

Additionally, UFO Odorless CA glue will not attack foam. This is very important for modelers working with styrofoam, as normal CA glues can attack and destroy it, turning a precious model into scrap. If you want an instant glue to bond styrofoam, you can’t afford NOT to use UFO.

However, if you do not have a special sensitivity to the fumes and have adequate ventilation, and if you are not working on styrofoam, we recommend using our Hot Stuff Original thin CA glue or Special T thick CA glue instead. Hot Stuff cures a little faster and a little thinner than UFO Thin, and Special T cures a bit faster than UFO Thick, and both are considerably less expensive than their odorless counterparts, so for normal applications it is more efficient to use Hot Stuff or Special T.